6
y
Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’
as Yes(Work) or No(Do Not Work).
y
Manage key usability of Local(Front) Key and Remote Control. When selected to ‘Yes’, following ‘IR
Operation’ and ‘Local Key Operation’ will be worked by below.
(3) Volume
(0 ≤ Min ≤ Start ≤ Max ≤ 100)
(4) Key Operation
This entry sets the start volume level when is power on.
y
The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max)
y
The default setting is ‘Off’ (disabled).
y
When enabled, if the value is lower then the minimum specified in the minimum volume entry, the
minimum volume entry must be used.
y
When enabled, if the value is larger then the maximum specified in the maximum volume entry, the
maximum volume value must be used.
y
Access to a volume in ‘On Timer’ must be fixed to start volume when ‘Public Display Mode’ (Yes)
and ‘Start Volume’ (Off, 0 ~ 100) were set simultaneously.
This entry sets the maximum volume level the set. The level is specified as a number between
‘Minimum Volume’ to 100. (Min ≤
Max
≤ 100)
y
If the command volume up to higher than maximum volume’ is received, that should be ignored.
y
The default value is 100.
This entry sets the minimum volume level the set will produce.
y
The level is specified as a number between 0 to ‘Maximum Volume’. (0 ≤
Min
≤ Max)
y
If the command volume down to lower than minimum volume is received, that should be ignored.
y
The default value is 0.
(3-1) Start Volume
Decide whether work the LG remote control or not.
y
Able to set Normal, Use PWR Only, Block All
y
When ‘IR Operation’ is set to Block All, all normal remote keys don’t work. Use PWR Only (Block
except power) makes block all remote keys except power key.
y
Although ‘IR Operation’ value is Use PWR Only or Block All.
»
It can work in ‘Service mode’. (In-Start, In-Stop, Power-Only, ADJ, Hotel-Mode,
Hotel-Mode-Ready, P-Check, S-check, In-Time, FMode-Init, FMode-Start, FMode-AV, FMode-F1)
»
Menu key action to enter the ‘Installation Menu’ and key action with
‘Special menu(In-Start / EZ-Adjust …)’ are still available.
y
When ‘IR Operation’ is set to 0 (Work), all remote keys are available.
(4-1) IR Operation
(3-2) Maximum Volume
(3-3) Minimum Volume
