8
Sleep Function
When the sleep timer is used, the power is auto-
matically turned off after the specified time has
elapsed.
1.
To specify the time delay before the power is
turned off, press SLEEP.
In the display window you see
for about 5 seconds. This means that the sys-
tem turns off automatically after 90 minutes.
Press SLEEP until the desired time is dis-
played.
2.
To check the remaining time until the power is
turned off, press SLEEP while the sleep func-
tion is active. The time remaining is displayed
for about 5 seconds.
ote
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you wish to stop the function, press the SLEEP
button repeatedly until “SLEEP 10” appears, and
then press SLEEP once again while “SLEEP 10” is
displayed.
Audio Adjustment
Volume Adjustment
• Turn the VOLUME CONTROL KNOB clockwise
to increase the sound level, or counterclockwise
to decrease it.
• Using the remote control, press VOLUME
CONTROL (
) to increase the sound level, or
(
) to decrease it.
Headphone Socket
Connect a stereo headphone plug ( 3.5mm) into
the headphone jack to listen to the sound through
headphones. The speakers are automatically dis-
connected when you plug in the headphones
(not supplied).
MUTE
Press
MUTE
to temporary stop the sound such as
when you answer the telephone.
The “
” indicator flashes in the display window.
To cancel it, press MUTE again.
Sound Quality Adjustment
You can select a desired sound mode by using
EQ
button on the front panel or
EQ PATT.
button on
the remote control.
When a sound mode passes by with the left side
from the right, press EQ or EQ PATT..
FLAT
t
ROCK
t
POP
t
CLASSIC
t
FLAT ...
SURROUND
You can select a desired surround mode by using
SURROUND
button on the front panel or
SURR.
button on the remote control.
SURROUND ON
t
SURROUND OFF
The
SURR.
indicator lights in the display window.
XDSS (Extreme Dynamic Sound System)
Press
XDSS
to reinforce treble, bass and the
surround effect. The “XDSS ON” or “XDSS OFF”
indicator lights. To cancel, press XDSS again.
MP3/(WMA) Optimize
This function is optimizered for compressible
MP3/WMA file. It is improved the bass sound to
make sweet sound.
Each time you press
OPTIMIZE
on the front panel.
The setting changes in the following order.
MP3 - OPT ON
t
MP3 - OPT OFF ...
DIMMER
This function is turned the LED (Light-emitting
diode) of front panel off and darken the display
window by half in power-on status.
Press
DIMMER
once. The LED (Light-emitting
diode) of front panel is turned off.
If you press it once more, the display window will
be darken by half. To cancel it press the button
again.
Adjusting the voltage
-
- OPTIONAL
If your unit is equipped with a voltage selector at
the back side, be sure to set it to your local power
supplied before connecting the AC power cord.
/
Operation
