6
Connections
Speaker System Connection
Connect the speaker cords to the speaker termi-
nals
.
L
AUXIN
otes
• Be sure to match the speaker cord to the appro-
priate terminal on the components: + to + and –
to –. If the cords are reversed, the sound will be
distorted and will lack base.
• If you use front speakers with low maximum
input rating, adjust the volume carefully to avoid
excessive output on the speakers.
• Do not disassemble the front cover of supplied
speaker.
Antenna (Aerial) Connections
Connect the supplied FM/AM antennas for listening to the radio.
otes
• To prevent noise pickup, keep the AM loop antenna away from the unit and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
Auxiliary Function
1.
Connect an auxiliary device i.e. TV or VCR,
via the rear mounted AUX phone sockets.
2.
Press AUX.
otes
• You can also record from the auxiliary input
source, see Recording Section.
• Turn the unit off and then connect an auxiliary
device before you connect an auxiliary device.
Because it may be made a noise.
Red
Black
Right speaker
Left speaker
L
VIDEO
OUT
IN
AUDIO (L)
AUDIO (R)
AUXIN
To AUDIO IN
Auxiliary device
To AUDIO OUT
L
AUXIN
AM(MW) loop
antenna (aerial) (Supplied)
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
FM wire antenna
(supplied)
