12 Room Air Conditioner
Operation
Operation
• Designed for COOLING ONLY.
• Powerful and quiet cooling.
• Top-down chassis for the simple instal-
lation and service.
• Low air-intake, top cooled-air discharge.
• Built-in adjustable Thermistor
• Washable one-touch filter
• Compact size
• Equipped with reliable and efficient rotary
compressor.
REMOTE CONTROL
DISPLAY
'
F
TIMER
POWER
MODE
TEMP
FAN
SPEED
F1 LOW
F2 MED
F3 HIGH
Dry
Timer
Fan
Energy
Saver
Cool
Power
Temp
Fan Speed
Timer
Mode
1
2
3
4
5
1
2
6
3
4
5
PRECAUTION: The Remote Control unit will not
function properly if strong light strikes the sensor window
of the air conditioner or if there are obstacles between the
Remote Control unit and the air conditioner.
POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room. The temperature can be set within a range of 60°F to
86°F by 1°F. (16°C to 30°C by 1°C)
Select the lower number for lower temperature of the room.
OPERATION MODE SELECTION BUTTON
Every time you push this button, it will shift among COOL, ENERGY SAVER, FAN and DRY.
- Energy Saver: If Energy Save mode is selected, the fan stops when the compressor stops cooling.a
Approximately every 3 minutes the fan will turn on and check the room air to determine if cooling is needed.
FAN SPEED SELECTOR
Every time you push this button, it is set as follows.
(Hi [F3]
➔
Low [F1]
➔
Med [F2]
➔
Hi [F3]
➔
Low [F1]
➔
...)
ON/OFF TIMER BUTTON
You can set the time when the unit will turn on or turn off automatically by pressing the timer button. If the unit is operating,
this button controls the time it will be turned off. If the unit is off state, this button controls the time it will start. Every time
you push this button, the remaining time will be set as follows.
- Stopping operation
(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
8Hours
➔
9Hours
➔
10Hours
➔
11Hours
➔
12Hours
➔
0Hour
➔
1Hour
➔
2Hours
➔
... )
- Starting operation
(1Hour
➔
2Hours
➔
3Hours
➔
4Hours
➔
5Hours
➔
6Hours
➔
7Hours
➔
8Hours
➔
9Hours
➔
10Hours
➔
11Hours
➔
12Hours
➔
off
➔
1Hour
➔
2Hours
➔
... )
REMOCON SIGNAL RECEIVER
Function of Controls