• Designed for COOLING ONLY.
• Powerful and quiet cooling.
• Slide-in and slide-out chassis for the simple instal-
lation and service.
• Side air-intake, side cooled-air discharge.
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever OPEN position.
The damper is opened and room air is exhausted.
• THERMOSTAT
Thermostat will automatically control the temperature
of the room. Select a higher number for a cooler tem-
perature in the room. The temperature is selected by
positioning the knob to the desired position.
The 5 or 6 position is a normal setting for average
conditions.
• Built-in adjustable THERMOSTAT
• Washable one-touch filter
• Compact size
• Equipped with reliable and efficient rotary compressor.
Service Manual 17
Operation
Operation
Features
Control Locations Function of Controls
CLOSE
VENT
OPEN
• Operation
Off
- Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan
- Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation.
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
• For Normal Cooling
1. Turn the Operation Knob to the High Cool from the Low
Cool setting.
2. Set the Thermostat control to the desired temperature
mark 5 (the mid-point is a good starting position). If the
room temperature is not satisfactory after a reasonable
time, adjust the control to a cooler or warmer setting, as
appropriate.
• For Maximum Cooling
1. Turn the Operation Knob to the High Cool setting.
2. Set the Thermostat control to the 9 temperature mark.
• For Quieter Operation
1. Turn the Operation Knob to the Low Cool setting.
2. Set the Thermostat control as needed.
CAUTION: When the air conditioner has completed its cooling operation and is
turned off or set to the fan position, wait at least 3 minutes before resetting to the
cooling operation again.
