12
INSTALLATION
Unit Installation
1
Set the air conditioner in the window so that
is centered. Place the air conditioner so that
front edge of the bottom guide is against the
back edge of the sill.
Bring the window down so that the front edge
of the upper guide is in front of the window.
Make sure that air conditioner is level or
tilting slightly to the outside.
2
Extend the guide panels to fill the window
opening using 4 Type B screws to secure
them.
3
Cut the foam strip to the window width. Stuff
the foam strip between the glass and the
window to prevent air and insects from
getting into the room. Fasten the L bracket
using a Type A screw.
CAUTION
●
During the following step, hold unit firmly until
window sash is lowered to top channel behind
side panel frames. Personal injury or property
damage may result if unit falls from window.
CAUTION
●
To prevent broken glass or damage to windows,
on vinyl or other similarly constructed windows,
attach the window locking beacket to the
window side jamb with one Type A screw.
Window Frame
Upper Guide
L Bracket
Bottom Guide
Seal
About
¼"
L Bracket
Screws
(Type B)
Screw
(Type A)
Foam Strip
4
Install the L bracket behind the inner
window sill, with short side of bracket as
shown. Use the 2 Type A screws provided.
The bracket helps to hold unit securely in
place. Be sure to place bracket edge flush
against back of inner sill.
NOTE
●
L Bracket
Outer Sill
Inner Sill
Center Line
3
Open the window and mark center line
on the center of the inner sill.
Room Side
Inner Sill
Center Line
