LG LW5224R Скачать руководство пользователя страница 27

Страница: 27 / 57

Operation and settings

Notes:

•

When system reboot after time setting, time of system
could be delayed. If you set the time correctly, set the
[Synchronize with NTP server] option.

•

Refer to NTP configuration as operation system of the
Recording Server when the Recording Server use record-
ing function and NTP server.

Server time

Server time: Displays the current date and time of the
IP device.

•

Save: Click this button to confirm the settings.

Maintenance

System reboot

Click the [Reboot] button to restart the IP device. It takes
some minutes for the IP device to start again.

Restore and backup

Backup: To take a backup all of the settings.

1. Click the [Backup] button. The Warning window is

displayed.

2. Click the [Save] button.

3. Select the Backup folder and set the file name.

4. Click the [Save] button to save the current setting

data.

Restore:

1. Click the [Browse] button.

2. Find and open the file in which the configuration

setting data is stored.

3. Click the [Restore] button and the system settings

will be restored and reboot the system.

Notes:

•

Backup and Restore can happen on IP device having the
same version of firmware. This feature is not intended for
multi-configurations or for firmware upgrades.

•

[Backup] function is allowed in HTTP protocol but not in
HTTPS protocol.

Firmware

Upgrade

1. Click the [Browse] button

2. Find and open the firmware file.

3. Click the [Upload] button.

4. Click the [Upgrade] button to update the

firmware.

Содержание LW5224R


























































Результаты поиска

Содержание LW5224R

Отзывы:

Похожие инструкции для LW5224R

Бренды по названию

Популярные бренды

LG LW5224R, Руководство пользователя

Результаты поиска

Содержание LW5224R

Отзывы:

Похожие инструкции для LW5224R

Бренды по названию

Популярные бренды