LG LW332 Series Скачать руководство пользователя страница 79

Страница: 79 / 84

Bormann

•

Mark Adler.

Permission is hereby granted, free of charge, to any

person obtaining a copy of this software and associated

documentation files (the “Software”), to deal in the

Software without restriction, including without limitation

the rights to use, copy, modify, merge, publish, distribute,

sublicense, and/or sell copies of the Software, and to

permit persons to whom the Software is furnished to do so,

subject to the following conditions:

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY

OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS

OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,

DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION

OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT

OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE

OR OTHER DEALINGS IN THE SOFTWARE.

Open source software notice

Содержание LW332 Series





















































































Результаты поиска

Содержание LW332 Series

Отзывы:

Похожие инструкции для LW332 Series

Бренды по названию

Популярные бренды

LG LW332 Series, Руководство пользователя

Результаты поиска

Содержание LW332 Series

Отзывы:

Похожие инструкции для LW332 Series

Бренды по названию

Популярные бренды