13
EN
Cabinet Installation
Inside Sill
Inside Sill
Center Hole
Center Hole
Outside Sill
Outside Sill
1
Open the window. Mark a line on the center of
the inside sill.
Carefully place the cabinet in the window and
align the center hole on the cabinet bottom
front with the center line on the sill.
Inside Sill
Inside Sill
Center Hole
Center Hole
2
Pull the bottom window sash down behind the
upper guide until It meets the cabinet.
Window Sash
Window Sash
Upper Panel
Upper Panel
Guide
Guide
NOTE
•
Do not pull the window sash down so tightly
that the movement of the curtain panels is
restricted.
3
Loosely assemble each sill support.
Sill Support
Sill Support
Nut
Nut
Bolt
Bolt
NOTE
•
If the distance to the outer window sill is not
that deep, you may not need the bolt and nut.
4
Use 2 type A screws to attach a sill support
to the cabinet track holes on one side. Use
the cabinet track holes that will place the sill
support nearest to the outer edge of the sill.
The longer side of the sill support should be
facing outside the window.
Repeat with the second sill support on the
opposite side of the cabinet.
Screws (Type A)
Screws (Type A)
Indoor
Indoor
Cabinet Track Holes
Cabinet Track Holes
Outdoor
Outdoor
5
Install the cabinet with a slight tilt (about 1/2”)
downward on the outside.
Use the bolt and nut to adjust the tilt of the
cabinet.
about 1/2”
about 1/2”
Cabinet
Cabinet
CAUTION
•
Do not drill a hole in the bottom pan.
The product is designed to operate with
approximately 1/2” of water in the bottom pan.
There is no need to add water if the pan is dry.
