manualshive.com logo in svg

LG LVW900 series, Руководство пользователя

Поделиться
Скачать
LG LVW900 series Скачать руководство пользователя страница 30

30

 

Operation and settings 

GOP size:  It means “Group of Pictures”. The higher 

 

>

the GOP, the better is the video quality of the camera. 
Edit the value of GOP from 1 ~ 30. This setting is valid 
for H.264 video format only.

Quality: Select the Quality. 

 

>

VBR: The bit rate may vary depending on the 

 

-

complexity of the video to meet the selected 
quality.

CBR: The video quality may vary in order to pre-

 

-

serve a constant bit rate.

Stream quality: If the [Quality] option set to VBR, this 

 

>

option is displayed. Select the stream quality from 
the drop down box, the camera supports five types 
(Highest, High, Medium, Low and Lowest)

Bit rate: If the [Quality] option set to CBR, this option 

 

>

is displayed. Edit the bit rate value from 64 ~ 10240 
Kbps.

Save: Click this button to confirm the settings.

• 

Audio 

Audio In

Enable: Enables the check box when you are going 

 

>

to send the audio from the microphone input con-
nector.

Note: 

The Clients connected to the IP device remains unaf-
fected with additional changes made in the setting.

Audio type: Select the codec when you send the 

 

>

audio from the microphone input connector.

Audio Out

Enable: Enables the check box to output the audio 

 

>

from the speaker.

Save: Click this button to confirm the settings.

• 

Содержание LVW900 series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды