background image

Contents, 

safety and cleaning

Please read the following information carefully.

2

Contents

Introducing

your video recorder

and remote control

3

Connecting

to a television and

decoder or satellite receiver

4

Tuning

TV stations

5

Adjusting TV stations manually

6

Operating

your Video Recorder

7

Recording 

Television programs

8

Timer recording

9

Advanced functions

10-13

Troubleshooting

14

Controlling your TV with the 
supplied remote control and 
technical specifications

15

Safety

• Position your Video Recorder so

that no bright light or sunlight falls
directly onto it.

• Care should be taken not to

expose your Video Recorder to
any unnecessary vibration, 
moisture, dust or heat.

• During electrical storms it is 

advisable to unplug both the aerial
cable and mains plug to prevent
accidental damage to your Video
Recorder and TV.

• Do not operate your Video

Recorder if it is damaged.

• If your Video Recorder still does

not operate properly, unplug it and
call your dealer. Your VCR should
not be repaired by anyone except 
qualified service personnel.

• Never remove the top cover of

your Video Recorder as this can
expose you to very high voltage
and other hazards.

• Ensure that your Video Recorder is

placed in a position to allow a free
flow of air.

• The apparatus shall not be

exposed to dripping or splashing
and that no objects filled with 
liquids, such as vases, shall be
placed on the apparatus.

This product is 
manufactured to comply
with the radio interference
requirements of EEC
DIRECTIVE 89/336/EEC,
93/68/EEC and
73/23/EEC.

Cleaning 

1

Unplug the Video Recorder from
the mains supply.

2

Clean the cabinet with a soft
damp cloth, do not apply liquid
cleaners or aerosol cleaners.

Never spray cleaning liquids on or
near the Video Recorder.

Video head cleaning

Whenever a video cassette is insert-

ed into or ejected from your VCR the

video head is automatically cleaned.

This should mean that additional

head cleaning should not be neces-

sary. However dirt accumulating on

the head after a long period of time

can cause the playback picture to

become blurred or broken up. High

quality video cassette tapes will not

normally deposit dirt onto the video

head, but old or damaged tapes

might.

GC981NS.BBELLLK_ENG  7/17/09  3:04 PM  Page 2

Содержание LV4280
















Отзывы: