28
OPERATION
Timer On/Off
The Upper or Lower Timer On/Off serves as an extra
timer in the kitchen that beeps when the set time has
run out. It does not start or stop cooking.
The Timer On/Off feature can be used during any of
the oven control function.
Setting the Timer (for example to set 5 minutes)
1
Press
Timer On/Off
. 0:00 with HR inside it
appears and Timer flashes in the display.
2
Press
plus(+)
or
minus(-)
to select the desired
time. Plus(+) increases the time and minus(-)
decreases the time.
3
Press
Timer On/Off
or
Start
to start the Timer.
The remaining time countdown appears in the
display.
nOTE
If
Timer On/Off
is pressed, the timer is canceled
and the display returns to the time of day.
4
When the set time runs out,
End
shows in the
display. The indicator tones sound every
15 seconds until
Timer On/Off
is pressed.
nOTE
•
If the remaining time is not in the display, recall
the remaining time by pressing
Timer On/Off
.
•
Press
Timer On/Off
twice to set the time in
minutes and seconds.
•
Press
Timer On/Off
once to set the time in
hours and minutes.
Cancelling the Timer
1
Press
Timer
On/Off
once.
The display returns to the time of day.
Connect
The Connect button is used to connect the appliance
to a home Wi-Fi network.
1
Press
Upper CLEAr/OFF
and
Lower CLEAr/
OFF
.
2
Press and hold
Timer On/Off
for 3 seconds.
3
The power-on chime sounds, Set appears in the
display, and the Wi-Fi icon ( ) blinks.
4
Register the appliance on the Wi-Fi network
using the smart phone app. (See page 42.)
5
To disconnect the appliance from the network,
press and hold
Timer On/Off
for 3 seconds.
Settings
Press and hold
Start Time
for three seconds.
Then press the
Start Time
key repeatedly to toggle
through and change oven settings.
The
Settings
key allows you to:
•
set the hour mode on the clock (12 or 24 hours)
•
enable/disable convection auto conversion
•
adjust the oven temperature
•
activate/deactivate the preheating alarm light
•
set the beeper volume
•
switch the temperature scale between Fahrenheit
and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Press and hold
Start Time
for three seconds.
2
Press
plus(+)
or
minus(-)
to set the desired
hour mode on the clock.
3
Press
Start
to accept the desired change.
Setting Convection Auto Conversion
When
Conv. Bake
and
Conv. roast
are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select
Conv. Bake
, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Press and hold
Start Time
for three seconds.
Then press
Start Time
repeatedly until
Auto
appears in the display
2
Press
plus(+)
or
minus(-)
to enable or disable
the feature.
3
Press
Start
to accept the change.
