LG LUPXC2386N, Руководство по обслуживанию

Страница: 87 / 102

- 87 -
1. Fan installed on the multi.duct on the rear side of the filter operates.
2. Fan is repeatedly turned on for 10 minutes and then off for 60 minutes.
3. If the R-door is opened while the fan is operating,the fan will be turned off,and when the R-door is closed,the fan will be
turned on.
4. LED near the filter installed on the multi duct is turned on when the R -door is opened and off when closed .
11-2-7. AUTO Mode
1. Fan installed on the multi.duct on the rear side of the filter operates.
2. Fan is repeatedly turned on for 10 minutes and then off for 5 minutes for 4 hours,and then automatically switches over to
AUTO Mode.
3. If the R -door is opened while the fan is operating,the fan will be turned off,and when the R -door is closed,the fan will be
turned on.
4. LED near the filter installed on the multi duct is turned on when the R -d oor is opened and off when closed.
11-2-8. POWER Mode
1. You can select water, cube, crush, or measured fill water (4oz, 8oz, 16oz, 32oz) by press buttons that label is printed.
2. If you press one of the buttons that dispenser menu, selected dispenser icon is turned on and
the other dispenser icons are turned off.
3. If you press measured fill water buttons (4oz, 8oz, 16oz, 32oz), selected measured fill menu led and water icon turned on and
the other dispenser icons are turned off.
“LOCK” is activated with Lock animation on LCD screen and turned on Lock LED after blinking 2 times.
4. If you press dispenser pad with holding your cup in the dispenser, water or ice will be dropped into your cup.
5. If you select measured fill menu (4oz, 8oz, 16oz, 32oz) and press dispenser pad with
holding your cup in the dispenser, water will be dropped into your cup until the amount of water to meet.
6. If you dispensing the measured fill water, dispensing is stop when press the buttons that
dispenser menu or release dispenser pad. And then selected measured fill menu LED turned off. But water icon is still turned on.
7. When after initially establishing the water comes out, the water than inside fills and until at the time of quality the hour is caught.
11-2-10. Dispenser use selection
1. You can set Ice Maker ON or OFF by Ice Maker ON/OFF button.
2. If you press and hold the button for 3 seconds,the state of Ice Maker will be
changed (OFF
˧
ON,ON
˧
OFF).
3. If you set Ice Maker OFF,Ice Maker does not make Ice anymore.(but dispenser
3. When the Fresh Air Filter LED blinks or
displayed Replace Filter Icon in LCD screen,
you must exchange the filter.
4. After replacing the filter, press and hold Fresh
Air Filter button for more than 3 seconds.
After then Fresh Air Filter LED blinks off and show
animation about Fresh Air Filter in LCD screen with reset status.
Display of Fresh Air Filter replacement
Display screen in
Refrigerator
Temperature
Press the Fresh
Filter button
one time
LED Blinking
auger moter will work).
11-2-11. Ice Maker ON/OFF selection
1. Please select Ice Plus function for quick freezing.
2. When you press the Ice Plus button, show Ice Plus animation on
LCD screen and turned on Ice Plus LED.
3. Ice Plus function automatically turns off after a fixed time passes.
11-2-9. How to operate the Ice Plus function
11-2-12
Air Filter condition display function