LG LU34 T Series, Руководство по установке

Страница: 44 / 53

ENGLISH
44
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
IR OUT Using Guide
Suitable / Not Recommend remote-controller data format
Item Formats
Suitable data format NEC, RC5, Toshiba
Not recommend data format Continuous data format (short burst/gap signal)
IR Receiver specifications
Carrier frequency
37.9 KHz
Peak Wavelength
940 nm
Minimum burst length
Min. 300 us
Minimum gap time is required of
Min. 350 us
Data word length
Max. 100 ms
Minimum gap time in the data stream is needed of Min. 50 ms
Parameter Symbol Conditions Min Typ Max Unit
High Level Out Pulse Width Twh
Burst Wave = 600 µs
Period = 1.2 ms
400 - 800 µs
Low Level Out Pulse Width Twl 400 - 800 µs
• If not use the remote-controller with data formats recommended, IR output signals will be
suppressed automatically by IR receiver.
• In this case, LG does not guarantee IR working function.
• To make sure of this matter, here are two methods as below.
- Use the remote-controller with suitable data formats.
- Use the IR dongle receiver of the set-top box.