32
OPERATION
Remote Start
If the appliance is registered on a home Wi-Fi
network, this function starts preheating and then
holds the temperature for up to an hour (including
preheating time). If the appliance is not registered on
the network, “OFF” appears in the display. Follow the
instructions on page 33 to register the appliance on
the network.
Set the oven mode knob to the
Remote Start
position
to use the function.
/RZHU
8SSH
U
FRPPR
Q
/R
ZH
U
/RZ
HU
5HPRWH
6WDUW
Setting Remote Start
1
Open the oven door to make sure the oven is
empty and ready for pre-heating. Close the oven
door.
2
Within 30 seconds of closing the door, turn the
oven mode knob to Remote Start to use the
function. If more than 30 seconds passes before
you initiate Remote Start, “door” appears in the
display. If this occurs, open and close the door
and try again.
3
When ON appears in the display, the Remote
Start function is ready to use.
4
Follow the directions in the smart phone
application to set the cook mode, temperature,
and run time (preheating time plus holding time).
NOTE
Do not place food in oven before or during
Remote Start run time.
Remote Start is disconnected in the following
situations:
•
Remote Start is never set up in the smart phone
app.
•
The Remote Start status is "OFF" or "door".
•
Remote Start function can not be started if
either upper or lower oven is in use.
•
The Remote Start function cannot be started
when the oven door is open. A beep alerts you
to shut the door.
Содержание LTE4815 Series
Страница 114: ...Aide mémoire ...
Страница 115: ...Aide mémoire ...