background image

ENGLISH

25

Connecting PC as monitor

24

Connecting PC as monitor

Picture adjustment

You can adjust picture Contrast, Brightness, Temperature,
Horizontal/Vertical position, Clock, Phase, Auto and Reset
as you prefer.

1. Press the TV/PC button to select the PC mode.
2. Press the MENU button.
3. Press the PR

x

xy

y

button to select the desired

picture item.

4. Press the VOL

Ï

Ïq

q

button to make appropriate

adjustments.

Contrast
This function is to adjust picture to light/dark.
Brightness
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down
as you prefer.
Clock
This function is to minimize any vertical bars or stripes
visible on the screen background. And the horizontal
screen size will also change.
Phase
This function allows you to remove any horizontal noise
and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen
position, clock and clock phase. The displayed image will
disappear for a few seconds while the Auto-configuration
is in process.
Note: Some signal from some graphics boards may not
function properly. If the results are unsatisfactory, adjust
your monitor’s position, clock and clock phase manually.
Reset
This function allows you to return to the good picture
reproduction programmed at the factory and cannot be
changed.

5. Press the TV/AV button to store the adjustment.

VGA/DTV INPUT 

1. Connect the VGA IN cable

(D sub jack) from the
monitor output socket of
the PC to the PC/DTV
input socket of the set.

2. Connect the Audio cable

from the PC to the A/V
IN(L(MONO), R) 
of the
set.

3. Press the TV/AV button to select PC mode.
4. Switch on the PC, and the PC screen appears on the set.

The set can be operated as the PC monitor.

Resolution

Note:
a. If the set is cold, there may be a small “flicker” when the set is switched on. This is

normal, there is nothing wrong with the set.

b. Some dot defects may appear on the screen, like Red, Green or Blue spots.

However, this will have no impact or effect on the monitor performance.

POWER

MENU

TV/AV

PR

OK

PR

VOL

VOL

TV/PC

SLEEP

TEXT/MIX

UPDATE TIME REVEAL HOLD

Q.VIEW

LIST

PSM

SSM

I/II

1

2

3

4

5

6

7

8

9

*

*

0

▲▼ ◀▶

MENU

%%

TV/AV

Contrast

x

x

0     

Ï

Ï

90      

q

q

100

y

y

640 X 480

AUTO

640X480
640X480
640X480
640X480
640X480
720X400

800X600
800X600
800X600
800X600
800X600

VGA

SVGA

31.5 KHz

35 KHz

37.9 KHz
37.5 KHz
43.5 KHz
31.5 KHz

35.2 KHz
37.9 KHz
48.1 KHz
46.9 KHz
53.7 KHz

60 Hz
67 Hz
72 Hz
75 Hz
85 Hz
70 Hz

56 Hz
60 Hz
72 Hz
75 Hz
85 Hz

Mode

Resolution

Horizontal

frequency (KHz)

Vertical

frequency (Hz)

ANT.

PC/DTV INPUT

SCART

H/P S-VIDEO

A/V-IN

VIDEO

L

R

A/V-OUT

DC 15V

VIDEO

L

R

Contrast

Brightness

Temperature

H-position

V-position

Clock

Phase

Auto

AUTO

Reset

Содержание LT-20AEP















Отзывы: