6
→
When installing the product on a masonry wall, turn the 8 screws on the A part counterclockwise to separate the
screw and bracket.
→
After aligning the wall bracket to the location to install, mark the part to screw on the wall and then remove the
wall bracket.
→
Refer to page 4 to attach the wall bracket.
→
Use a level to check whether the wall mount is level.
→
If the screw cannot be assembled in the designated location inevitably, it can be assembled by rearranging to the
closest location. But, do not change 2 or more locations from the designated spot.
→
Fix the right and left side with two bolts each.
→
Wall mounting equipment will be set up based in VESA 600X400 regulation.
→
At this time, use a "+" driver (Manual or motorized) or 8mm wrench to tighten the screw so that the wall, wall
bracket and screw are completely pressed against one another.
Separate the wall mount screw.
3
How to install the wall mount
<When installing on a masonry wall>
→
When you separate the 8 screws on the wall mount connected to the wall bracket for use with a wooden wall,
it is much easier to install the product.
A
