LG LST-3410A, Руководство по обслуживанию

Страница: 23 / 135

3-11
1. Test S/W
At the time of the power up, connect the serial cable to the service port, locate the cursor at the TeraTerm
window, and turn on the power of the LST-3410A by pressing “shift”+”D” at the PC keyboard.
Enter “svcLST3410” as the password.
(The password is capital sensitive)
The total test is performed by entering “T.”
======================================================
ROM TEST Program For PVR-SET (2003/09/26)
======================================================
--------------------- System Info ----------------------
Processor = 405GP, PVR: 40110145
Processor speed = 200 MHz
PLB speed = 100 MHz
OPB speed = 33 MHz
Ext Bus speed = 33 MHz
PCI Bus speed = 33 MHz (Sync)
Amount of SDRAM = 32 MBytes
Internal PCI arbiter enabled
--------------------------------------------------------
******************* TEST MENU******************
1 - System SDRAM Test
2 - HD-II Memory Test
3 - HD-II DMA Test
4 - HD-II Audio Decoder Test
5 - PCF8584-A(TUNER/MICOM/GEMSTAR Test)
6 - CPU I2C(EEPROM/VSB/4450/3226/170B) Test
7 - PCI Device(TPN-II/IDE/KFIR) Test
8 - IDE R/W Test
9 - Video Display Test
A - FLASH Memory Test
B - FLASH Program from Serial port
C - Flash Program from HDD
D - Ethernet Ping Test
E - TI-1394 Test
F - GPIO Test
->
Preparation for using H/W Test Code stored at the flash memory
Section possible to check by using H/W Test Code
Initial screen
TEST S/W