LGIC CDMA Fixed Wireless Terminal
LST-230(F) / 2300(F)
23
Enable or Disable G3 FAX mode
1. Press “#”+”#”+”7” continuously to enter G3 FAX programming mode.
2. Press “#” and Enable (“1”) or Disable (“2”) code.
Enable means that Data call path is changed to G3 FAX.
Disable means that Data call path is changed to RS-232C. (Default mode)
3. Press “*” to save.
Note 1
. Sending or receiving some
documents
by G3 FAX is possible only in AC power mode. If AC power is
gone, you can not use the G3 Fax machine connected to the LST-230F/2300F.
Note 2
. The recommended usage for this G3 Fax Mode is like this;
1. Disable G3 Fax Mode for normal usage.
-
You can make a voice call using the telephone device connected to the “Tel/Fax” jack of the LST-
230F/2300F.
-
You can fax a document using the G3 Fax machine connected to the “Tel/Fax” jack of the LST-
230F/2300F.
2. To receive or send a document by fax, should be set G3 Fax Mode. After receiving the fax
document, disable G3 Fax Mode for another voice call.
3. If you want to use the LST-230F/2300F terminal only for G3 Fax sending or receiving other than the
voice call, then keep the terminal in G3 Fax Mode enabled state
