LSP-350
LGE CDMA Fixed Wireless Phone
21
3. Basic Operation
3.1 Making a Call
You can make a call as follows.
1.
Pick up the handset or press button.
2.
Listen for dial tone.
3.
Enter the phone number with area code if needed.
4.
Wait for the Auto Time-out.
5.
The call is connected and you may start conversation.
6.
To disconnect the call, replace the handset or press button.
When the user presses the 'Dial/Flash' button after dialing any desired number, if the user pick up
the handset or press the speaker phone button, the phone makes a call immediately.
3.2 3 way call
You can start tripartite conversation.
1.
Enter the phone number while talking over the phone.
2.
Press
Dial/Flash
button.
* This service should be registerd by Telecom Service Company.
3.3 Call waiting
While a call is in progress, you may hear two beeps indicating another incoming call. When call
waiting is enabled, you may put the active call on hold while you answer the other incoming call.
1.
Press
Clear
or
End
button, Call Waiting window is gone. Or
2.
Press
Dial/Flash
button, you may start conversation with called number.
3.
Re-press Dial/Flash button, you may start conversation with previous number.
3.4 Volume Control
1.
Press
left/right
button of navigation while in a call, adjust receiver volume.
2.
Press
up/down
button of navigation while in a call, adjust MIC volume.
