LSP-350
LGE CDMA Fixed Wireless Phone
18
2.3 Installation
You should follow each step carefully as shown below in order to guarantee the proper operation of
CDMA Fixed Wireless Phone.
STEP I. Check Components
??
The following components are supplied for Fixed Wireless Phone.
1. LSP-350 Main Unit with Handset(Including inner backup battery) -1EA-
2. Dipole Antenna
-1EA-
3. AC/DC Power Adapter
-1EA-
4. User Guide
-1EA-
??
Please make sure that these components are present before you begin to install the
unit. If any of the components are missed or damaged, contact the store where you
purchased the phone immediately.
STEP II. Place the Terminal
??
Place the unit on the stable flat surface area (desk, table, etc.). Serious damage may
result if the unit is dropped. Do not place the unit within 1 meter of heaters or radiators.
This unit is designed for desktop usage. Avoid the direct exposure to sunlight and
dampness.
??
Read the SAFETY INFORMATION located in the first part of this document before you
place the unit.
STEP III. Connect Components (See the figures in “Installation Steps”.)
??
Connect the antenna to the TNC antenna connector located at the top of the unit. If you
have placed the unit on a flat surface, position the antenna upright.
??
Connect the curl cord of the handset to the RJ-11 port located on the left side of the
unit.