Safety Precautions
Operating Instructions
Care and Maintenance
Troubleshooting Tips
Care and Maintenance
Operating Instructions
Safety Precautions
2
WARNING
WARNING
CAUTION
CAUTION
WARNING
WARNING
Safety precautions
Safety Precautions
Warning ................................2
Caution .................................3
Operating Instructions
Preparation before operation ..4
Remote Control Features .....5
Operation Mode Selection ......6
Additional features ..............13
Care and Maintenance
Care and Maintenance .......17
Operation Tips ....................19
Troubleshooting tips
Before You
Call For Service ...............20
To prevent injury and property damage, follow these instructions.
Incorrect operation due to ignoring instructions will cause harm or
damage, the seriousness of which is indicated by the following
symbols.
This symbol shows the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to
property.
■
The following items are classified by these symblos.
Never Do This
Always Do This
Plug in the power plug
properly.
Do not operate or stop the unit by
inserting or pulling out the power plug.
Do not damage or use an
unspecified power cord.
• Otherwise, it will cause electric shock
or fire due to heat generation or
electric shock.
• It will cause electric shock or fire due
to heat generation.
• It will cause electric shock or fire.
• In the supply cord is damaged, it mut
be replaced by the manufacturer or
its service agent or a similarly
quallfied person in order to avoid a
hazard. (Y Attachment)
Do not modify power cord length or
share the outlet with other appliances.
Do not operate with wet hands or in
damp environment.
Do not direct airflow at room occupants
only.
• It will cause electric shock or fire due
to heat generation.
• It may cause electric shock.
• This could damage your health.
Always perform grounding work.
Do not allow water to run into
electric parts.
Always install air leakage breaker
and a dedicated switching board.
• No grounding may cause electric
shock.
• It may cause failure of machine or
electric shock.
• No installation may cause fire and
electric shock accident.
Unplug the unit if strange
sounds, smell, or smoke
comes from it.
Do not use the socket if it is
loose or damaged.
Do not open the entrance
during operation.
• It may cause fire and electric
shock accident.
• It may cause fire and electric
shock.
• It may cause electric shock.
Keep firearms away.
Do not use the power cord close to the
heating tools.
Do not use the power cord near flammable
gas or combustibles, such as gasoline,
benzene, thinner, etc.
• It may cause fire.
• It may cause fire and electric shock.
• It may cause an explosion or fire.
