LG LSCG306 Series, Руководство по установке

Страница: 3 / 32

3
ENGLISH
IN THE COMMONWEALTH OF MASSACHUSETTS
PREPARING FOR INSTALLATION
FOR YOUR SAFETY
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball type gas shut-off valves, they shall
be the T-handle type.
• A flexible gas connector, when used, must not
exceed 3 feet in length.
I N S TA L L AT I O N I N S T R U C T I O N S
READ ALL INSTRUCTIONS BEFORE INSTALLATION
WARNING:
If the information in
this manual is not followed exactly, a fire or
explosion may result causing property damage,
personal injury or death.
– Do not store or use combustible materials,
gasoline or other flammable vapors and
liquids in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switches,
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor′s phone. Follow the gas supplier
instructions.
• If you cannot contact your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
TOOLS YOU WILL NEED
MATERIALS YOU MAY NEED
MATERIALS YOU MAY NEED
• Gas line shut-off valve
• To reduce the possibility of gas leaks, apply teflon
tape or a thread compound approved for use with
LP or Natural gases to all threaded connections.
• Flexible metal appliance connector (5/8” I.D.)
A 3-foot length is recommended for ease of
installation but other lengths are acceptable.
Never use an old connector when installing a new
cooktop.
• Flare union adapter for connection to gas supply
line (3/4” or 1/2” NPT x 5/8” I.D.)
• Flare union adapter for connection to pressure
regulator on cooktop. (1/4” NPT x 1/2” I.D.)
• Liquid leak detector or soapy water.
Phillips screwdriver
Joint
Sealant
Pipe Fittings
Flexible Connector
Shut Off
Valve
Open-end or
adjustable wrench
Pipe wrench(2)
(one for support)
Flat-blade screwdriver
Pencil and ruler