22
Care and Maintenance
How to remove and replace parts
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Ice storage bin
After dispenser
is used
To remove a shelf, push the shelf to the left
,
lift the left part of the shelf a bit
, lift the right
part up
➂
, and take it out.
Lift the door rack holding both sides
and
pull it out
.
Hold the ice storage bin as shown in the right
figure and pull it out
while slightly lifting it
.
Do not dismantle the ice storage bin unless
it is necessary.
Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
2
1
3
2
1
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
NOTE
To remove the lamp cover, separate the shelf
over the lamp cover and pull the lamp cover
forwards
➁
while pressing the bottom side of
the lamp cover upwards
➀
. Turn the bulb
counterclockwise.
Use a 40-watt bulb (max.) which can be purchased
at a service center.
1
2