18
ASSEMBLING AND PREPARING
ENG
ENGLISH ENGLISH
Not using the DESK-TYPE STAND
(Only 32/37/42/47LT64
**, 32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**)
Image shown may differ from your TV.
When installing the wall-mounted unit, use the
protection cover.
Insert the
Protection cover
into the TV until
clicking sound.
Protection Cover
NOTE
y
y
When removing Protection Cover from bottom
of TV insert your fingers into hole of cover
hold firmly and pull upwards towards you to
remove. (Only 32LS34**)
Protection cover
Protection cover
(Only 32LS34**)
When installing the wall mounting bracket, use the
Protection cover. This will protect the opening from
accumulating dust and dirt.
y
y
Push the supplied protection cover into the
opening at the bottom of the TV until it locks
in place.
NOTE
y
y
Use the screws that are listed on the VESA
standard screw specifications.
y
y
The wall mount kit includes an installation
manual and necessary parts.
y
y
The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
y
y
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
y
y
For more information, refer to the manual
supplied with the wall mount.
y
y
When attaching a third-party wall mounting
bracket to the TV, insert the wall mount
inner spacers into the TV wall mount holes
to move your TV in vertical angle. Please
make sure not to use the spacers for LG
wall mounting bracket. (Only 55LS64**)
Wall Mount Inner Spacer
CAUTION
y
y
Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
y
y
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
y
y
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
y
y
Use the screws and wall mount bracket
that meet the VESA standard. Any
damages or injuries by misuse or using an
improper accessory are not covered by the
manufacturer's warranty.
y
y
On the 47LT**** models, use M6 x 51
screws.
y
y
If you use the wall mounting bracket, do
not fix screw into holes for assembling the
stand.
