15
ASSEMBLING AND PREPARING
ENG
ENGLISH
ENGLISH
CAUTION
y
y
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y
y
Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed.
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
y
y
Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
y
y
Do not place the TV near or on sources of
heat, as this may result in fire or other
damage.
Attaching the TV to a table
Image shown may differ from your TV.
The TV must be attached to desk so it cannot be
pulled in a forward/backward direction, potentially
causing injury or damaging the product.
(Only 32/37/42/47LT64**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**
)
(not provided as parts of the product)
4-Screws
Stand
Table
Screws:
M5 x L
(*L: Table depth + 8-10 mm)
ex) Table depth: 15 mm, Screw:
M5 x 25
Securing the TV to a table
(Only 32/37/42/47LT64
**,
32/37/42/47LT65**,
32/37/42/47LT74**,
32/37/42/47LT76**
,
32/42LS34**)
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
WARNING
y
y
To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
