LG LRSES2706V /01, Руководство по обслуживанию

Страница: 18 / 88

Icemaker and dispenser working principles and repair
Icemaker’s Basic Operating Method
n O r e w o P n O r e w o P
Start Position
Κ Adjusts Ice Tray to Start Position with power on. Κ Adjusts Ice Tray to Start Position with power on.
Icemaking
Mode
Full Ice
Check
Harvest
Mode
Full Ice?
Fill
Test Mode
Κ If water becomes ices in the ice tray, Ice-detecting
sensor check if the ice bin is full.
Κ Twist the ice tray to drop ice into the ICE BIN.
Κ Supply water to the ice tray by operating the solenoid
valve.
Κ To force water to supply to the ice tray, or check
icemaker’s condition press and hold the FILL Key for
about 3seconds.
In the test mode, The icemaker will run through 3
stages step by step
:
Harvest Fill water Ice making
To reset the icemaker’s operation, set the power switch OFF position and back it to ON position.
Κ Waits until water becomes ice.
For cold air circulation, Ice tray will be
on a slightly tilt one hour after
ice-making mode begins. Atilt ice tray
means icemaker’s normal operation.
Ice Tray on a slightly tilt
Power Switch
18
Copyright © 2020 LG Electronics Inc. All rights
reserved. Only training and service purposes.