LG LRSC26910SW Скачать руководство пользователя страница 81

Страница: 81 / 131

17. Sound

TROUBLE DIAGNOSIS

- 81 -

Problems

Causes

Checks

Measures

Remarks

Hiss

sound

1. Loud sound of compressor

1.1 Check the level of the

1) Maintain horizontal level.

operation.

refrigerator.

2) Replace bushing and seat if they

1.2 Check the bushing seat

are sagged and aged.

conditions (sagging and aging).

3) Touch the piping at various place

along its route. Install a damper at

2. Pipes resonate sound which is

2.1 Check the level of pipes

the point where your tuch reduces

connected to the compressor.

connected to the compressor

the noise.

and their interference.

4) Avoid pipe interference.

2.2 Check bushing inserting

5) Replace defective fan and fan

conditions in pipes.

motor.

2.3 Touch pipes with hands or screw

6) Adjust fan to be in the center of

-driver (check the change of

the fan guide.

sound).

7) Leave a clearance between

interfering parts and seal gaps in

3. Fan operation sound in the freezer

3.1 Check fan insertion depth and

the structures.

compartment.

blade damage.

8) Reassemble the parts which make

3.2 Check the interference with

sound.

structures.

9) Leave a clearance if evaporator

3.3 Check fan motor.

pipes and suction pipe touch

3.4 Check fan motor bushing

freezer shroud.

insertion and aging conditions.

4. Fan operation sound in the

4.1 Same as fan confirmation in the

compressor compartment.

refrigerator.

4.2 Check drip tray leg insertion.

4.3 Check the screw fastening

conditions at condenser and

drip tray.

Содержание LRSC26910SW




































































































































Результаты поиска

Содержание LRSC26910SW

Отзывы:

Бренды по названию

Популярные бренды

LG LRSC26910SW, Руководство по обслуживанию

Результаты поиска

Содержание LRSC26910SW

Отзывы:

Бренды по названию

Популярные бренды