LG LRH7080D Series, Руководство пользователя

Страница: 64 / 94

64 LG Network Client Program
5
LG Ne
tw
ork Clien
t P
rogr
am
again.
• XX: Connection failed.
3. Click the [CLOSE] button to exit the window.
ATM/POS Setting
• Interface Device: Select the interface device from the drop-
down list.
• Camera: Select the camera number for mapping with ATM/POS
device.
• Baud Rate: Select the desired parameter to set the
communication speed between DVR and ATM/POS device.
• Data Bits: Select the number of the data bits for RS-485
communication.
• Stop Bits: Select the desired parameter. The stop bit is added to
the last of data, in asynchronous communication.
• Parity: Select the desired parameter. The parity bit is added to
the data, to perform parity check.
Storage
• Overwrite:
- On : Overwrite recording is possible when the partition of
HDD have fully recorded.
- Off: Do not use overwriting.
• Full Warning: When the HDD has overflowed a warning message
is displayed.
• Auto Delete: Set the auto delete date. If you set the auto delete
date, the recorded data will be deleted except the data within
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
• Storage Saving : Saves the storage space by reducing the quality
of the recorded data.
Display settings
• Channel: Selects the desired channel to adjust.
Channel Composition
• Name: Selects the desired channel.
PTZ
Settings for the PTZ cameras connected via the data port of the
RS-485 terminal.
• Port: Selects the connected data port of the RS-485 terminal
on the rear panel. The DATA 2 port is used to control the PTZ
camera connected to DVR or to control by using the LKD1000
controller. If you want to use the PTZ camera via DATA 2 port,
you should set the [Remote Controller ID] to [NONE]. If you use
the LKD1000 controller to control the DVR via DATA 2 port, you
should set the [Remote Controller ID] number between 1 and
16. When you select [COAXIAL COMMUNICATION], [Protocol]
option is set to [PELCO_C] automatically and [Control ID], [Baud
Rate] options are deactivated.
• Control ID: Selects the PTZ camera ID. Make the same settings
as the PTZ camera.
• Protocol: Selects the protocol supported by PTZ camera.
• Baud Rate: Selects the communication speed.
Video Adjustment
Adjust the brightness, contrast and color settings of each camera
channel. You can see the settings screen from the preview windows.
• Brightness: Adjust the brightness value from 0 to 100 for the
selected channel.
• Contrast: Adjust the contrast value from 0 to 100 for the selected
channel.
• Color: Adjust the color value from 0 to 100 for the selected
channel.