LG LRD5080 Series, Руководство пользователя

Страница: 40 / 90

40 Installation
3
Ins
talla
tion
SNMP
The Simple Network Management Protocol (SNMP) is an application
protocol to exchange the management information of network
devices.
• SNMP Version: Selects a SNMP version if SNMP is allowed to
access to this device.
• Port: Enter the number for SNMP port.
• Community String (V2 only): Specifies the SNMP management
community in which you want to enable this system (e.g.
lgecommunity or public).
• User (V3 only): Enter the security name for the SNMP.
• Authentication (V3 only): Select a mode for the SNMP
Authentication. (MD5 or SHA)
• Password (V3 only): Enter the password for the SNMP
Authentication.
• Privacy (V3 only): Select a privacy mode for the SNMP
Authentication. (DES or AES)
• Password (V3 only): Enter the password for the privacy mode.
• Trap IP Address: Specifies the IP address of the computer you
intend to use as your network management station and to
which SNMP traps will be sent.
• Trap Community String: Specifies the SNMP trap community in
which you want to enable this system (e.g. lgecommunity or
public).
Output
• Relay Off
- ALARM ACKNOWLEDGE: Use the ALM.OFF button to stop
alarm.
-
POST-ALARM TIME: The alarm is stopped after post-alarm
time.
• System Alarm Out: Outputs the alarm (relay) signal via the
selected alarm out terminal number when the system has some
problem. If you do not use this function, select [NONE] option.
• HDD Fail Alarm Out: Outputs the alarm (relay) signal via the
selected alarm out terminal number when the HDD is failed. If
you do not use this function, select [NONE] option.
• Video Loss Alarm Out: Outputs the alarm (relay) signal via the
selected alarm out terminal number when a video signal from
the camera has stopped because of a cable disconnection or
malfunction of a camera. If you do not use this function, select
[NONE] option.
• Fan Fail Alarm Out: Outputs the alarm(relay) signal via the
selected alarm out terminal number when the fan is failed. If
you do not use this function, select [NONE]option.