LG LPT-DW113M, Руководство пользователя

Страница: 27 / 44

Introduction
Connections
Installation
Setup
configuration
Operating
Client
Program
Additional
Information
Specifications
27
• Back Light Compensation (in the 1/3 page)
- BLC Mode: Select the BLC mode among the
Off, BLC, Auto or WDR.
- BLC Level: Select [BLC] on the [BLC Mode]
option to active the [BLC level] option. Adjust a
desired BLC (Back Light Compensation) level.
- WDR Level: Select [WDR] on the [BLC Mode]
option to active the [WDR level] option. Adjust
a desired WDR (Wide Dynamic Range) level.
• Exposure Mode (in the 2/3 page)
- Auto: Adjusts the exposure automatically.
> Brightness: Adjusts the brightness. If you
click [Default], the brightness is set to
default.
> Flickerless: Use for removing the flicker of
picture. Set to [ON] to remove the flicker.
> E Sensitive: The electronic sensitivity
enhancement function varies the shutter
speed to increase the sensitivity in low light
conditions. Select [Auto] option, then select
a value from the drop-down list. You can set
the value to x2~x20 (If you select x20, the
sensitivity is increased automatically up to
x20).
- Slow Manual: Adjusts the exposure manually.
> AGC Adjust: Select the AGC adjust level
(0-7).
> E Sensitive: You can set the fixed value to
x1~x20 (If you select x20, the sensitivity is
increased to a fixed x20).
- Shutter Manual: Adjusts the exposure manually.
> AGC Adjust: Select the AGC adjust level.
(0-7).
> Shutter Speed: You can select a shutter
speed.
- NTSC: 1/100, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000, 1/20000 or 1/50000 sec-
onds.
- PAL: 1/120, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000, 1/20000 or 1/50000 sec-
onds.
• Focus & Zoom Setup (in the 3/3 page)
- Focus Dist.: Selects the minimum shooting dis-
tance for the focus (1cm, 10cm, 50cm, 1m, 3m
or 5m).
- Focus Mode: Select one of the following
modes.
> Auto: Focus is adjusted automatically.
> Manual: Focus is adjusted or set manually.
Focus is adjusted only when the [Near] or
[Far] button on the Web Viewer is pressed.
> Push Auto: Auto-focus is activated only
when the [ ] button on the Web Viewer is
pressed.
Notes:
• If you press the [Near] or [Far] button on
the Web Viewer while the Auto-focus mode,
the focus mode is automatically changed to
[Manual].
• If you press the [ ] button on the Web
Viewer while the Manual (Auto) mode, the
focus mode is changed to [Auto (Manual)].
- Zoom Start: Select a zoom start position to x1
~ x26.
- Zoom End: Select a zoom end position to
x54~x2.
• Special Setup (in the 3/3 page)
- Day & Night: Select the Day&Night mode
among the Auto, Day and Night.
- PTZ Reset: Click [Reset] button to set the posi-
tion that the camera was stayed 10 seconds or
more and default magnification of the camera.
When the focus or position is wrong, you can
reset the position and focus of the camera
using this function.
Note:
If you set the camera setup options, the settings are
saved as soon as you set.
Setup
configuration