LG LPT-DW113M, Руководство пользователя

Страница: 21 / 44

Introduction
Connections
Installation
Setup
configuration
Operating
Client
Program
Additional
Information
Specifications
21
Network Setup
• IP Setup: Set the IP address for the camera.
- Dynamic IP Address: Select when you set the
IP address automatically from DHCP server
to the camera. When you select Dynamic IP
Address, make sure that there is an DHCP
server on the network.
- Static IP Address: Enter the IP address manu-
ally for the camera.
> IP Address: Enter the IP address of the cam-
era.
> Subnet Mask: Enter the subnet mask.
> Default Gateway: Enter the default gateway.
• DNS Server:
- First DNS server: Enter the IP address of the
first DNS server.
- Second DNS server: Enter the IP address of
the second DNS server.
• DDNS Server: The DDNS function is serviced
using TCP 8245 port by “No-IP” (http://www.no-
ip.com/).
- Server: Select [Enable] option to use the
DDNS server. If you select [Disable] option, the
Hostname, ID and Password options can not
used.
- Hostname: Enter the registered host name of
the No-IP web site.
- ID: Enter the registed user ID of the No-IP web
site.
- Password: Enter the registered password of the
No-IP web site.
Note:
For more detail information, visit the No-IP web
site or to register the No-IP web site see page
41.
• MAC Address: Displayed MAC address of the
camera.
• Port Setup:
- Default Port: Select when you use the default
port. The factory default port is as shown
below.
Port Number Function
80, TCP Web Server Port
9000, TCP Log-In Port
9001, TCP Stream Server Port
9002, TCP Audio Port
9003, TCP Interactive Audio Port
- User Port: Select and change the port number
you want.
Note:
You can use the port number between 1024 and
65535. The recommended port number is from
49152 to 65535. (The port number from 1500 to
1510 are used for this camera.)
Note:
After change the options, you must click [Save] but-
ton in the option to confirm the settings.
Setup
configuration