LG LP701CE, Руководство пользователя

Страница: 11 / 23

Owner’s Manual 11
ENGLISH
Installation
• UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door.
2. Remove the front gille by pulling it out at the bottom
to release it, then lift it up along the unit top front.
3. To maintain the best performance of the LG PTAC, an
insulation strip must be attached. The insulation strip
is provided with the box. Refer to the diagram below.
1) Take out the insulation strip from the upper
packing.
2) Attach the insulation strip onto the rear upper side
of the wall sleeve.
4. Slide the unit into the wall sleeve and secure with
6 screws through the unit flange holes.
5. Reinstall the front grille by hooking the top over the
unit top, then pushing it in at the bottom.
Front
Insulation Strip
Rear
Sleeve
280 mm
(11")