background image

Warning:

 This is a class A product. In a 

domestic environment this product may cause 

radio interference in which case the user may 

be required to take adequate measures.

Warning:

 To reduce a risk of fire or electric 

shock, do not expose this product to rain or 

moisture.

Warning:

 Please adopt the power adapter 

which can meet the safety extra low voltage 

(SELV) standard. And source with DC 12 V or  

AC 24 V (depending on models) according 

to the IEC60950-1 and Limited Power Source 

standard.

Warning:

 Install the camera on a ceiling or wall 

where can withstand the weight of 5 times of 

the camera including mounting bracket.

Caution:

 This installation shall be made by a 

qualified service person and shall conform to 

all local codes.

Caution: 

To avoid electrical shock, do not 

open the cabinet. Refer servicing to qualified 

personnel only.

Caution:

 The apparatus shall not be exposed 

to water (dripping or splashing) and no objects 

filled with liquids, such as vases, shall be placed 

on the apparatus.

Caution:

 Make sure the power supply voltage 

is correct before using the camera.

Caution:

 Do not drop the camera or subject it 

to physical shock.

Caution:

 The sensor may be burned out by 

a laser beam, so when any laser equipment is 

being used, make sure that the surface of the 

sensor not be exposed to the laser beam.

Caution:

 While shipping, the camera should be 

packed in its original packing.

Note:

Please make sure the product is installed 

appropriate places where secured from flood, 

such as under the eaves, to operate properly. 

This product is certified as IP66 standard. 

However, if there is any flood concerns, it 

is highly recommended to use an outdoor 

Housing. When you install the camera inside 

an outdoor Housing, please use one of the 
following methods:

1.   Remove the front glass of Housing before 

installing the camera. 

2.   To keep the front glass of Housing, remove 

the front cover, and then put the camera 
close to the front glass.

The Power Plug is the disconnecting device. 

In case of an emergency, the Power Plug 

must remain readily accessible.

LG Electronics hereby declares 
that this/these product(s)  
is/are in compliance with the 
essential requirements and 
other relevant provisions of 
Directive 2004/108/EC and 
2011/65/EU. 

Contact office for compliance of this 

product:

LG Electronics Inc. 
EU Representative, Krijgsman 1, 
1186 DM Amstelveen, The Netherlands

• 

Please note that this is NOT a Customer 
Service contact point. For Customer 
Service Information, see Warranty Card 
or contact the dealer that you purchased 
this product.

CAUTION

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

CAUTION: 

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is 
intended to alert the user to the presence of uninsulated dangerous voltage 
within the product’s enclosure that may be of sufficient magnitude to 
constitute a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the 
user to the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the product.

FCC WARNING: 

This equipment may generate or use radio frequency energy. Changes or 

modifications to this equipment may cause harmful interference unless the modifications are 
expressly approved in the instruction manual. The user could lose the authority to operate this 
equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause harmful interference to radio 
communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which 
case the user will be required to correct the interference at his own expense.

• 

A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this 
product in the end user.

• 

Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or 
equivalent type recommended by the manufacturer. Dispose of used batteries according to 
the manufacturer’s instructions.

• 

Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces 
or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Warning: 

Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning:

 Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Important Safety 

Instructions

1.  Read these instructions. 
2.  Keep these instructions. 
3.  Heed all warnings. 
4.  Follow all instructions. 
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. 

Install in accordance with the 

manufacturer’s instructions. 

8.  Do not install near any heat sources such 

as radiators, heat registers, stoves, or other 

apparatus (including amplifiers) that 

produce heat. 

9.  Do not defeat the safety purpose of the 

polarized or grounding-type plug. A 

polarized plug has two blades with one 

wider than the other. A grounding type 

plug has two blades and a third grounding 

prong. The wide blade or the third 

prong are provided for your safety. If the 

provided plug does not fit into your outlet, 

consult an electrician for replacement of 

the obsolete outlet.

10.  Protect the power cord from being 

walked on or pinched particularly at plugs, 

convenience receptacles, and the point 

where they exit from the apparatus.

11.  Only use attachments/accessories 

specified by the manufacturer.

12.  Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the apparatus. 
When a cart is used, use caution when 
moving the cart/apparatus combination 
to avoid injury from tip-over.

13.  Unplug this apparatus during lightning 

storms or when unused for long periods 

of time.

14.  Refer all servicing to qualified service 

personnel. Servicing is required when 

the apparatus has been damaged in any 

way, such as power-supply cord or plug 

is damaged, liquid has been spilled or 

objects have fallen into the apparatus, the 

apparatus has been exposed to rain or 

moisture, does not operate normally, or 
has been dropped.

Handling of the unit

Be careful not to spill water or other liquids on 

the unit. Be cautious not to get combustible or 

metallic material inside the body. If used with 

foreign matter inside, the camera is liable to fail 

or to get cause of fire or electric shock.

• 

Remove dust or dirt on the surface of the 

lens with a blower.

• 

Use a soft and lint-free, dry cloth(such as 

glass cleaner) to clean the body. If it is 

very dirty, use a cloth dampened with a 

small quantity of neutral detergent then 

wipe dry.

• 

Avoid the use of volatile solvents such 

as thinners, alcohol, benzene and 

insecticides. 

They may damage the surface finish and/

or impair the operation of the camera.

• 

This camera is designed for mounting on 

the ceiling or wall. If you install this camera 
upside down, it may cause malfunction.

Operating and storage 

location

Avoid viewing a very bright object (such as 

light fittings) during an extended period. Avoid 

operating or storing the unit in the following 

locations.

• 

Extremely hot or cold places (operating 

temperature -10 °C to 50 °C, however, we 

recommend that the unit be used within a 

temperature range of 0 °C to 45 °C)

• 

Damp or dust place

• 

Places exposed to rain

• 

Places subject to strong vibration

• 

Close to generators of powerful 

electromagnetic radiation such as radio or 

TV transmitters.

• 

Do not use the camera in such place 

where rapid temperature fluctuation by 

switching an air conditioner on and off.

Specification 

Item

LNU7210R series

Camera

Image Device

6.4 mm (1/2.8 Type) CMOS

Lens Type

3 mm to 9 mm F1.2 (x3 Zoom) 

Day / Night

ICR (Auto / Day / Night / External / Schedule)

Minimum 
Illumination

Color:

 0.03 lx @ F1.2 (1/30 sec, 50 IRE)

B/W:

 0 lx @ IR LED on

WDR

Support

IR Distance

30 m

Image 
Enhancement 

Backlight Compensation, 2D+3D-DNR, De-fog, Exposure 
Control, AGC, White Balance, Privacy Masking, Sharpness, EIS, 
Pivot, Smart IR

Video / 
Audio

Compression 

H.264, H.264_High, MJPEG

Resolution

1920 x 1080 / 1280 x 720 / D1 (704 x 576) / CIF (352 x 240)

Maximum 
Frame Rate

60 fps @ 1920 x 1080

Multi-Streaming Up to 4
ROI (Smart-
Codec)

Support (Up to 8)

Video Analytics

Motion detection, Tampering alarm, Face detection, Intrusion 
detection, Crossing line, Object counting, Object removal, 
Object desertion

Text Overlay

Support

Audio 
Compression

G.711, G.726

2-way Audio 

Support

Audio Detection Support

Event

Event Trigger

Video analytics, Audio detection, Alarm input

Event 
Notification

Relay Out, Email, FTP

Pre Event 
Buffering

Support

Interface

Analog Out

BNC out

Audio In / Out 

1 / 1

Alarm In / Out

1 In / 1 Out

SD Slot

micro SD (Up to 32 GB)

Network

Ethernet

RJ-45 10 / 100 BASE-T

Security 

Password protection, HTTPS (SSL, TLS), IP filtering, IEEE 802.1X

Open Protocol

ONVIF 2.2 Profile S, PSIA 1.1

Protocol

IPv4 and IPv6 :

 TCP/IP, UDP, HTTP, HTTPS, RTP, RTSP, DHCP, ICMP, 

QoS, UPnP

IPv4 : 

FTP, SMTP, NTP, ARP, SNMP v1/v2c/v3, DDNS(LG)

Integrated 
Software

LG Ipsolute VMS Suite / Mobile application (iPhone, iPad, 
Android)

Connections

Up to 20

General

Power Source

AC 24 V, DC 12 V, PoE

Maximum 
Power 
Consumption

10.6 W (AC 24 V), 9.1 W (DC 12 V), 9.6 W (PoE)

Maximum Input 
Current

670 mA (AC 24 V), 750 mA (DC 12 V), 200 mA (PoE)

Operation 
Temperature / 
Humidity

-10 ºC to 50 ºC / 0 % RH to 80 % RH

Protection

IK10, IP66

Dimension (W x 
H x D)

92.1 mm x 89.8 mm x 338.6 mm

Weight 

1.54 kg (with Sunshield 1.7 kg)

Note that design and specification of this unit may change from the manual as quality and 
improvement without prior notice.

Components 

Camera, CD (Software and Owner’s Manual), Installation Manual, Test monitor cable, Wrench, Screws 
(3 EA), Installation sticker, Sunshield and Fixing screw

MODEL
LNU7210R series

Please read this manual carefully before operating 
your set and retain it for future reference.  

OWNER’S MANUAL

High  

Definition

 

Network 
Camera

Отзывы: