LG LNP3021R, Руководство пользователя

Страница: 3 / 27

Network IR PTZ Camera Owner’s Manual
II
NOTICE: For safety marking information including
product identification and supply ratings, please refer to
the main label on the bottom or rear of the apparatus.
NOTICE: Please make sure the product is installed
appropriate places where secured from flood, such as
under the eaves, to operate properly. This product is
certified as IP66 standard.
However, if there is any flood concerns, it is highly
recommended to use an outdoor Housing. When you
install the camera inside an outdoor Housing, please
use one of the following methods:
1. Remove the front glass of Housing before installing
the camera.
2. To keep the front glass of Housing, remove the front
cover, and then put the camera close to the front glass.
Contact office for compliance of this product:
LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
Disposal of your old appliance
1. This crossed-out wheeled bin symbol indicates that
waste electrical and electronic products (WEEE)
should be disposed of separately from the municipal
waste stream.
2. Old electrical products can contain hazardous
substances so correct disposal of your old appliance
will help prevent potential negative consequences for
the environment and human health. Your old
appliance may contain reusable parts that could be
used to repair other products, and other valuable
materials that can be recycled to conserve limited
resources.
3. You can take your appliance either to the shop
where you purchased the product, or contact your
local government waste office for details of your
nearest authorized WEEE collection point. For the
most up to date information for your country please
see www.lg.com/global/recycling.
Handling of the unit
Be careful not to spill water or other liquids on the unit.
Be cautious not to get combustible or metallic material
inside the body. If used with foreign matter inside, the
camera is liable to fail or to get cause of fire or electric
shock.

Remove dust or dirt on the surface of the lens with a
blower.

Use a soft and lint-free, dry cloth (such as glass
cleaner) to clean the body. If it is very dirty, use a
cloth dampened with a small quantity of neutral
detergent then wipe dry.

Avoid the use of volatile solvents such as thinners,
alcohol, benzene and insecticides. They may
damage the surface finish and/ or impair the
operation of the camera.

This camera is designed for mounting on the ceiling
or wall. If you install this camera upside down, it
may cause malfunction.
Operating and storage location
Avoid viewing a very bright object (such as light
fittings) during an extended period. Avoid operating or
storing the unit in the following locations.

Extremely hot or cold places (operating temperature
-20 °C to 50 °C, however, we recommend that the
unit be used within a temperature range of -10 °C to
40 °C)

Damp or dust place

Places exposed to rain

Places subject to strong vibration

Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.

Do not use the camera in such place where rapid
temperature fluctuation by switching an air
conditioner on and off.