5
Installation
Installation the LNIC-10/100A series 10/100Mbps
PCI bus Fast Ethernet Card requires Hardware
installation first, then BIOS and Software
installation.
Step 1, Hardware Installation
1.
Switch off the computer, unplug the power
cord, and remove the computer’s cover.
2.
Select an unused PCI bus-master slot and
remove its protective bracket.
3.
Carefully insert the card and press until all
the edge connectors are firmly seated inside
the slot. Then, screw the card’s bracket
securely into the PC’s chassis.
4.
Install the bracket screw, which secures the
card to the cinouter chassis.
5.
Replace the computer’s cover and connect
the network cable to newly installed network
card. Reconnect the computer’s power cord
and plug it into the power outlet.
Step 2, BIOS Configuration
Due to a fault in some Plug-n-Play BIOS
programs, it happens occasionally that a newly
installed adapter is assigned an Interrupt Number
which is already assigned to another device. In
such a case, the conflict of Interrupt Number will
