LG LNB3100 Скачать руководство пользователя страница 5

Страница: 5 / 61

Operation and settings

Accessing the LG IP device

You can access the LG IP device by following the below steps.

Install LVi510 Program

It recommended to use LVi510 surely.

Discover the LG IP device using the IP Utility

The IP Utility can automatically discover and display LG IP

devices on your network.
The IP Utility shows the MAC address, IP address, Model

name and so on.
Note:
The computer running the IP Utility must be on the same

network segment (physical subnet) as the LG IP device.
2.1

Run the IP Utility program.

2.2

Click the [Search] button or select the [Search] option

in the Device search menu.

After a few seconds the found LG IP devices gets

displayed in the IP Utility window.

Logging in to the LG Smart Web Viewer

3.1

Run the IP Utility and find the LG IP devices.

3.2

When the LG IP devices appear in the IP Utility

window, double-click IP address or right click on the

same IP address and select “Connect to Web Page”

to start the LG Smart Web Viewer. When accessing

the LG Smart Web Viewer, the authentication dialog

appears on the screen.

3.3

Enter the user name and password. (Note that the

default administrator user name and password are

“admin”.)
Note:
Default password must be changed for security after

initial connection.

3.4

Click the [OK] button and then the LG Smart Web

Viewer is displayed in your browser.

Notes:
• You can also access the LG Smart Web Viewer as shown

below.
3.1 Start your Web browser.
3.2 Enter the IP address of the LG IP device in the address

bar of the browse.

3.3 Enter the user name and password set by the

administrator.

3.4 Click the [OK] button and then the LG Smart Web

Viewer is displayed in your browser.

• The LG Smart Web Viewer needs more time to display it

according to the network conditions.

• If the login window is not displayed, check the pop-up

blocker. If you set the pop-up blocker, the login window

is not displayed. You must allow the pop-ups.

• If you connect the LG Smart Web Viewer for the first time,

the Security Warning window is displayed to install the

LG Smart Web Viewer program. You must install the LG

Smart Web Viewer program for using the LG IP device.

• If your computer or network is protected by a proxy or

firewall, the proxy or firewall settings can prevent the LG

Smart Web Viewer program. Change the proxy or firewall

settings to activate the LG Smart Web Viewer program.

Содержание LNB3100






























































Результаты поиска

Содержание LNB3100

Отзывы:

Похожие инструкции для LNB3100

Бренды по названию

Популярные бренды

LG LNB3100, Руководство пользователя

Результаты поиска

Содержание LNB3100

Отзывы:

Похожие инструкции для LNB3100

Бренды по названию

Популярные бренды