manualshive.com logo in svg

LG LMXS28626 Series, Руководство по обслуживанию

Поделиться
Скачать
LG LMXS28626 Series Скачать руководство пользователя страница 98

98

14-1-7. How to operate the Hygiene fresh filter

Auto Mode

Hygiene Fresh

After 4 hours

POWER Mode

1.  Fan installed on the multi.duct on the rear side of the filter operates.

2.  Fan is repeatedly turned on for 10 minutes and then off for 60 minutes.

3.  If the R-door is opened while the fan is operating,the fan will be turned off,and when the R-door is closed,the fan will be 

turned on.

4.  LED near the filter installed on the multi duct is turned on when the R -door is opened and off when closed.

14-1-8. AUTO Mode

1.  Fan installed on the multi.duct on the rear side of the filter operates.

2.  Fan is repeatedly turned on for 10 minutes and then off for 5 minutes for 4 hours,and then automatically switches over to 

AUTO Mode.

3.  If the R -door is opened while the fan is operating,the fan will be turned off,and when the R -door is closed,the fan will 

be turned on.

4.  LED near the filter installed on the multi duct is turned on when the R -d oor is opened and off when closed. 

14-1-9. POWER Mode

Содержание LMXS28626 Series













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды