FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, a
nd (2) this device must accept any interference received, including interfer
ence that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a re
sidential installation. This equipment generates uses and can radiate radio freq
uency energy and, if not installed and used in accordance with the instructions
, may cause harmful interference to radio communications. However, there is n
o guarantee that interference will not occur in a particular installation. If this eq
uipment does cause harmful interference to radio or television reception, whic
h can be determined by turning the equipment off and on, the user is encourag
ed to try to correct the interference by one or more of the following measures:
‐
Reorient or relocate the receiving antenna.
‐
Increase the separation between the equipment and receiver.
‐
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help important an
nouncement
Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications Commission (FCC)
standards that limit human exposure to radio frequency (RF) energy emitted by
radio and telecommunications equipment. These standards prevent the sale of
mobile devices that exceed a maximum exposure level (known as the Specific
Absorption Rate, or SAR) of
1.02
W/kg. SAR information on this and other
model
devices can be accessed online on the FCC’s website through
transition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be much lower, as the device has
been designed to emit only the RF energy necessary to transmit a signal to the
nearest base station. By automatically emitting lower levels when possible,
your device reduces your overall exposure to RF energy.
The FCC has granted an Equipment Authorization for this model device based
on the compliance of all reported SAR levels with the FCC RF exposure
guidelines. This device has a FCC ID:
ZNFX130IM
[Model Number :
LMX130IM
]and the specific SAR levels for this device can be found at the
following FCC website : www.fcc.gov/oet/ea/.
