LG LMU246HV, Руководство по установке

Страница: 24 / 137

24 Multi Air Conditioner
Installation
Setting the Central-Control Address
Note : The remote controller displays 'HL' if central controller has locked the remote controller .
Out door
Room Temp
Total on
Central Run
Defrost Preheat
PQRCUCS0C
FAN
SPEED
MODE
FAN
SPEED
MODE
Group No.
Indoor Unit No.
TEMP
TEMP
TEMP
TEMP
1
If you want to set the address on the display
panel, press both temperature control buttons
(
▲
/
▼
) same time for three seconds.
2
Press the temperature-increasing button to change
the group number. Press the temperature-decreasing
button to change the indoor unit number.
e.g. As shown on the left side panel, it displays 23.
Group No. : 2
Indoor Unit No. : 3
3 Set the address by pressing both temperature
control buttons again(s/t) at the same time for
three seconds.
• If you connect the indoor unit to the central controller, you should set the network
address of the indoor unit so that the central controller could recognize it.
• The center-control address is composed of the group number and the indoor-unit
number.
Please set the address while using the central controller.
You don't need to set address if you don't use central controller.