background image

13

ENGLISH

Licenses

Supported licenses may differ by model. For more information about 

licenses, visit 

www.lg.com

.

Open source software notice 

information

To obtain the source code under GPL, LGPL, MPL, and other open 

source licenses, that is contained in this product, please visit 

http://

opensource.lge.com

.  

In addition to the source code, all referred license terms, warranty 

disclaimers and copyright notices are available for download.  

LG Electronics will also provide open source code to you on CD-ROM 

for a charge covering the cost of performing such distribution (such 

as the cost of media, shipping, and handling) upon email request to 

[email protected]. This offer is valid for three (3) years from the 

date on which you purchased the product.

Troubleshooting

 

Cannot control the TV with the remote control.

 

-

Check the remote control sensor on the product and try again.

 

-

Check if there is any obstacle between the product and the 

remote control.

 

-

Check if the batteries are still working and properly installed (  

to  ,   to  ).

 

No image display and no sound is produced.

 

-

Check if the product is turned on.

 

-

Check if the power cord is connected to a wall outlet.

 

-

Check if there is a problem in the wall outlet by connecting other 

products.

 

The TV turns off suddenly.

 

-

Check the power control settings. The power supply may be 

interrupted.

 

-

Check if the Sleep Timer / Timer Power Off is activated in the 

TIMERS settings.

 

-

If there is no signal while the TV is on, the TV will turn off 

automatically after 15 minutes of inactivity. 

 

When connecting to the PC (HDMI), ‘No signal’ or ‘Invalid Format’ 

is displayed.

 

-

Turn the TV off/on using the remote control.

 

-

Reconnect the HDMI cable.

 

-

Restart the PC with the TV on.

Specifications

 

The annual energy consumption indicated on the energy label is 

measured in accordance with IEC 62087 and the Hong Kong Energy 

Efficiency Labelling Scheme (EELS) (depending on the model).

 

The actual energy consumption depends on the usage 

environment (the content watched, TV settings, etc.). 

Wireless module Specification

 

As band channels can vary per country, the user cannot change or 

adjust the operating frequency. This product is configured for the 

regional frequency table.

 

For consideration of the user, this device should be installed and 

operated with a minimum distance of 20 cm between the device 

and the body. 

Wireless LAN module(WN8122E1) specification

Standard

IEEE802.11a/b/g/n

Frequency 

range

2400 to 2483.5 MHz

5150 to 5250 MHz
5725 to 5850 MHz

Output 

power 

(Max.)

802.11a: 16.5 dBm

802.11b: 16 dBm

802.11g: 15.5 dBm

802.11n - 2.4 GHz: 15.5 dBm

802.11n - 5 GHz: 16.5 dBm

Environment 

condition

Operating 

Temperature

0 °C to 40 °C

Operating 

Humidity

Less than 80 %

Storage 

Temperature

-20 °C to 60 °C

Storage 

Humidity

Less than 85 %

Digital TV

Analogue TV

Television 

system

DTMB

PAL D/K, PAL I, NTSC M

Programme 

coverage

DTMB : 21~69

PAL D/K : VHF/UHF 1~69, 

CATV 1~47

PAL I : VHF/UHF 1~69, CATV 

1~47

NTSC M : VHF/UHF 2~78, 

CATV 1~71

External 

antenna 

impedance

75 Ω

Содержание LH57 SERIES





































Отзывы: