LG LH-C360, Руководство пользователя

Страница: 50 / 53

50
Symptom
This remote control
uses the same
buttons for VCR and
DVD functions
(ex. PLAY).
The tape does not run
during recording.
The tape will not rewind
or fast-forward.
The playback picture
does not appear while
the tape is running.
Noise appears during
visual search.
Noise appears during
normal playback.
Breaks are noticeable
in Hi-Fi soundtrack.
Recording cannot be
started.
Tape-to-tape editing is
not possible.
Timer recording won’t
work.
No Hi-Fi sound.
Cause
The remote control is not pointed at the
remote sensor of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD/VCR Combi receiver.
There is an obstacle in the path of the remote
control and the DVD/VCR Combi receiver.
The batteries in the remote control are
exhausted.
This remote control uses the same
buttons for VCR and DVD functions
(ex. PLAY).
The DVD/VCR Combi receiver is in the
RECORD PAUSE MODE.
The tape is already fully rewound or fast-for-
warded.
If you’re using only the RF cable for connec-
tion.
This is normal.
The automatic tracking mode is engaged.
The automatic tracking mode is engaged.
There is no tape loaded, or the tape loaded
has had its record safety tab removed.
The source (another VCR, camcorder) has
not been properly connected.
The clock/or the timer have been set
incorrectly.
The timer is not engaged.
The loaded tape has had its record safety
tab removed.
Audio mode is not set properly.
Correction
Point the remote control at the remote
sensor of the DVD/VCR Combi receiver.
Operate the remote control within 23 ft
(7 m).
Remove the obstacle.
Replace the batteries with new ones.
When using a VCR, first press the VCR
button. When using a DVD, first press
the CD/DVD button.
Press PAUSE/STEP (
X
) to resume
recording.
Check the tape.
Set the TV to the Video channel
(see p. 17).
Turn camcorder on and operate
properly.
Try manual tracking (see p. 27).
Try manual tracking (see p. 27).
Insert a tape, or using adhesive tape,
cover the hole where the tab was
removed.
Confirm that the camcorder is properly
connected.
Re-perform the clock and/or timer set-
tings.
Press POWER and confirm that the
timer indicator is displayed on the
DVD/VCR Combi receiver’s Display.
Insert a pate with adhesive tape, or
insert a tape with the record safety tab
intact.
Select “STEREO” by repeatedly press-
ing
AUDIO on the remote control.
Moisture Condensation
Moisture condensation can occur:
• When the DVD/VCR Combi receiver is moved from a
cold place to a warm place.
• Under extremely humid conditions.
In locations where moisture condensation may occur:
• Keep the DVD/VCR Combi receiver plugged into an
AC power outlet with POWER On. This will help
prevent condensation.
• When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before using
it.