Installation and Setup
11
S
D
E
R
S-VIDEO
INPUT
AERIAL
Rear of TV
SCART INPUT
A
Decoder (or another VCR)
• Make one of the following connections, depending
on the capabilities of your existing equipment.
Tips
• Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
the connections described below.
• Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution
• Make sure the DVD/VCR Combi receiver is connect-
ed directly to the TV. Select the correct AV input on
your TV.
• Do not connect your DVD/VCR Combi receiver to
TV via your DVD/VCR Combi receiver. The DVD
image could be distorted by the copy protection
system.
Basic connections (AV)
1. Connect the
EURO AV1 AUDIO/VIDEO
on the
rear panel of the DVD/VCR Combi receiver to the
scart input socket on the TV using a SCART lead
(
E
).
2. You can connect such a Decoder (or another
VCR) to the DVD/VCR Combi receiver (
D
).
Basic connections (RF)
1. Connect the aerial cable (
A
) from your indoor/ out-
door aerial to ANT.IN jack on the rear panel of
DVD/VCR Combi receiver.
2. Connect the supplied RF cable (
R
) from the
RF. OUT
jack on the rear panel of DVD+VCR
Receiver to your television’s Aerial Input.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD/VCR
Combi receiver to the S-VIDEO IN jack on the TV
using the S-Video cable
(S)
.
Notes
• The signal of S-VIDEO OUT jack will output only
when the function mode is selected to CD/DVD.
• When you connect the DVD/VCR Combi receiver to
your TV, be sure to turn off the power and unplug
both units from the wall outlet before making any
connections.
TV & Decoder (or another VCR Connections)
Installation and Setup
Содержание LH-C360
Страница 53: ...P N 3834RH0124N ...