4
Setting up
Attaching the speakers to the DVD receiver
a
a
You will have received six speaker cables.
Each one is colour-coded by a band near each end and connects one of
the six speakers to the DVD receiver.
b
b
Connect the wires to the DVD receiver.
Match each wire’s coloured band to the same coloured connection
terminal on the rear of the DVD receiver. To connect the cable to the DVD
receiver, press each plastic finger pad to open the connection terminal.
Insert the wire and release the finger pad.
Connect the black end of each wire to the
terminals marked -(minus) and the other end
to the terminals (plus).
c
c
Connect the wires to the speakers.
Connect the other end of each wire to the correct speaker according to
the colour coding
:
To connect the cable to the speakers, press each plastic finger pad to open the
connection terminals on the base of each speaker. Insert the wire and release
the finger pad.
Be careful of the following
Be careful to make sure children do not put their hands or any objects into the
*speaker duct.
*Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure).
FRONT R
SUB WOOFER
FRONT L
Red
Orange
White
In front of you, to the right of the screen.
This can be placed in any front position.
In front of you, to the left of the screen.
POSITION
SPEAKER
Main Unit
1 Fix the post to the base by rotating the post. And Draw the
speaker cord through the hole on the base.
2 Draw the speaker cord through the hole on the speaker.
3 Fix the speaker to the stand by rotating the speaker. Connect the
speaker cord to the appropriate terminals on the speaker.
The speakers are detached from the speaker stands.
Assembling to the Speakers
HT462DZ1-A0_DIRNDLK_ENG_8607 8/10/09 1:38 PM Page 4