4. TROUBLE SHOOTING
- 107 -
Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Check the pin and battery
Connect terminals of I/O connector
Connection OK?
No
Yes
Is the u- USB
Cable voltage 4.8V (for 5.0V)
No
Yes
Is it charging properly
After turning on?
START
Check PMIC SMT status by X-ray
Exchange MiniABB or change
the Main board and reset.
Change I/O connector
Change TA (or u-USB cable)
END
Yes
No
Charger Troubleshooting Flow