4. TROUBLE SHOOTING
- 107 -
Copyright © 011 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
Check the pin and battery connect
terminals of I/O connector
Connection OK?
No
Yes
Is the u-USB
Cable voltage 4.8V (for 5.0V)
No
Yes
Is it changing properly
After turning on?
START
Check MiniABB SMT status by Xray.
Exchange MiniABB or change
the Main board and reset.
Change I/O connector
Change TA (or u-USB cable)
END
Yes
No
Charger Troubleshooting Flow