19
INSTALLATION
ENGLISH
2
Detach the wire harness (1). Unscrew the ground
wire (3) on the InstaView model only.
3
3
Rotate the hinge lever (1) clockwise. Lift the top
hinge (2) free of the hinge lever latch.
Hinge Lever Latch
CAUTION
•
When lifting the hinge free of the latch, be careful
that the door does not fall forward.
4
Lift the door from the middle hinge pin and
remove the door.
CAUTION
•
Place the door, inside facing up, on a non-
scratching surface.
Assembling the Right Refrigerator
Door
Install the right-side door first.
1
Make sure that the plastic sleeve is inserted in
the bottom of the door. Lower the door onto the
middle hinge pin as shown in the figure.
2
Fit the hinge (1) over the hinge lever latch and slot
it into place. Rotate the lever (2) counterclockwise
to secure the hinge.
Hinge Lever Latch
3
Connect the wire harness (1). On the InstaView
model, screw in the ground wire.
4
Place the cover (1) in its place. Insert and tighten
the cover screw (2).