LG LFX25960SB Скачать руководство пользователя страница 10

Страница: 10 / 75

- 10 -

2. Icemaking Mode

(1) Icemaking refers to the freezing of supplied water in the ice tray. Complete freezing is assured by

measuring the temperature of the tray with Icemaking SENSOR.

(2) Icemaking starts after completion of the water fill operation.
(3) The icemaking function is completed when the sensor reaches 1 9 °

∆

F (-7 °

∆

C), 55 minutes after starting.

NOTE : After the icemaker power is ON, the icemaker heater will be on for test for 6 seconds.

3. Harvest Mode

(1) Harvest (Ice removing) refers to the operation of dropping cubes into the ice bin from the tray when

icemaking has completed.

(2) Harvest mode:

• The Heater is ON for 30 seconds, then the motor starts.

• The feeler arm senses the quantity of ice in the ice storage bin while rotating with the EJECTOR.

A. Ice storage bin is full : The EJECTOR stops (heater off).

B. Ice storage bin is not full : The EJECTOR rotates twice to open for ice.

* If the EJECTOR does not rotate once within 5 minutes in B mode, separate heater control mode starts operating to

prevent the EJECTOR from being constrained. (It is recommended that the user open for ice to return to normal mode.)

4. Fill/Park Position

(1) Once a normal harvest mode has been completed, the water solenoid will be activated.
(2) The amount of water is adjusted by pressing the fill key repeatedly. This changes the time allowed for fill as illustrated in

the table below.

Water supply amount TABLE

STAGE

TIME TO SUPPLY

INDICATIONS

REMARKS

5 sec.

5.5 sec.

(FIRST STAGE)

6 sec.

The water amount will vary depending

on the water control switch setting as

well as the water pressure of the

connected water line.

Содержание LFX25960SB












































































Результаты поиска

Содержание LFX25960SB

Отзывы:

Похожие инструкции для LFX25960SB

Бренды по названию

Популярные бренды

LG LFX25960SB, Руководство по обслуживанию

Результаты поиска

Содержание LFX25960SB

Отзывы:

Похожие инструкции для LFX25960SB

Бренды по названию

Популярные бренды