background image

Connections and settings

 

33

Notifi cation

Sensor On: 

ON: Sends an e-mail when a sensor has occurred.

OFF: Not used.

Motion Detection: 

ON: Sends an e-mail when an motion detection has 
occurred.

OFF: Not used.

Disk Full:

ON: Sends an e-mail when the HDD has fully record-
ed.

OFF: Not used.

Admin PWD. Changed:

ON: Sends an e-mail when the administrator pass-
word has changed.

OFF: Not used.

Video Loss: 

ON: Sends an e-mail when a video signal from the 
camera has stopped because of a cable disconnec-
tion or malfunction of a camera.

OFF: Not used.

Power On/Off: 

ON: Sends an e-mail when power is on.

OFF: Not used.

-

-

-

-

-

-

-

-

-

-

-

-

Mail

Notification 

ON: Notifies the user of unit operating information 
by e-mail according to notification settings.

OFF: The notification function is not used.
The mail options are not set.

SMTP Server: Enter the SMTP Server address using the 
virtual keyboard. 
If notification is set to ON and the SMTP server option 
is empty, the SMTP Port, User Name, Password and TLS 
options are not set.

SMTP Port: Enter the SMTP Port Number using the 
virtual keyboard. Typically the port used for SMTP is 
25. However in some cases it is better to change this 
port number for added flexibility or security. If desired 
change the port number (1 ~ 65535).

User Name: Enter the user name using the virtual key-
board.

Password: Enter the password using the virtual key-
board.

TLS: Set to ON when using the TLS (Transport Layer 
Security) function. By default, TLS is OFF.

Mail Address (1-3): Enter the mail address using the vir-
tual keyboard. 
You can input up to 3 e-mail addresses.

E-mail Test: Select [E-mail Test] to test send an e-mail.

Note:

The SMTP server, SMTP port no., user name or password 
settings are optional. The DVR can send e-mail directly 
without the use of an SMTP server or MTA (message trans-
fer agent). In certain cases all e-mail should be forwarded 
to a specific SMTP server. Specify the server host name or IP 
address in such a case. For more detail on SMTP setup, ask 
your network administrator and/or mail service provider.

-

-

Содержание LE2104









































































Отзывы: