Remote Control
LOCK:
Displays the lock menu to change user type or
disable system operation.
OPEN:
Opens or closes the disc tray. This button is only
used for LE2104D models.
ID:
Set the appropriate DVR system ID to operate via
the IR Remote Controller when using the multiple DVR.
Press the ID button then press the number button with-
in 2 seconds to select the system ID of the DVR. If you
set the system ID to “0”, you can control multiple DVR at
the same time.
•
•
•
SPLIT:
Press to see different multiscreen modes.
SEQ:
Views the all channels in sequence on the full
screen display mode. You cannot use sequence mode
with the 4 split.
ALM.OFF:
Cancels alarm activation and returns the sys-
tem to the condition before the alarm was activated.
OSD:
Displays the submenu.
SETUP/ESC:
Displays the setup menu or cancels opera-
tion of the setup menu.
Arrow Buttons (
b B v V
):
Selects or moves between
the menu options.
ENTER:
Confirms menu selections.
COPY:
Copies the recording data to an external device.
SEARCH:
Displays the search menu.
MARK:
Sets the mark point for recording search. You
can set the mark point during the single or multi chan-
nel playback of recorded data.
PAUSE (
X
):
Pauses playback.
STOP(
x
):
Stops playback.
REC (
z
):
Starts or stops recording.
m/c
: Searches the recorded images in reverse or
skips the recorded images.
bB
: Playback or reverse playback of recorded images.
M/C
: Forward searches the recorded images or
skips the recorded images.
Number Buttons (0,1-9):
To select the PTZ preset num-
ber, ID, or channel.
INFO:
Displays or removes the system information win-
dow.
LOG:
Displays or removes the System Log List window.
PTZ:
Switches this unit to PTZ mode to control the con-
nected PTZ camera.
TOUR:
Tours all registered preset positions in the cam-
era.
ZOOM + / -:
Zooms in/out on the playback window.
FOCUS + / -:
Adjusts the focus of a camera.
IRIS + / -:
Adjusts the iris of a camera.
F1:
This button is not available.
PRESET
SET:
Registers the PTZ camera's preset positions.
CLEAR:
Deletes a memorized preset position.
MOVE:
Moves the camera to the preset position.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
-
-
-
10
Introduction
